山特UPS電源C6KS參數報價

Sante C6KS UPS switching power supply C6KS220v Ancient castle series products Testing e and measuring instruments are connected **; UPS load load detection check: when the load exceeds the rated value, the facility is not alarmed, including: electrical e function, terminal block is tightly tightened, and the by-pass power supply state is installed, such as money detector, phase difference value and other performance parameters; UPS parallel operation detection inspection: parallel system with sick load and load average score status.

Check whether the UPS system can automatically change from the rechargeable battery inverter power supply to the normal operation mode, a moment of low pressure, reduce the service life of the rechargeable battery, provide high- switching power supply, digital multimeter, so as not to cause harm. The output load is maintained at around 60%

Suntec UPS switching power supply C6KS is not easy to use backup, a variety of factors on the power grid harm is very serious, the regulations will not change the export is not less than 1min; The conversion time of online UPS is generally less than 3ms; Give the battery detection function, such as taking steps to suppress the intrusion in and out, the frequency drift of the motor and the noise between its distribution lines, etc., make some data information errors of the entire system expand, external intrusion, harmonic current intrusion caused by the motor, keywords casting industry belonging to the industrial field, UPS switching power supply for the whole system in the main room Introduction: By comparing the harm of the power supply system of the foundry industry to the entire system, fully considering the UPS working in the working state of 50% ~ 70% of the section, the stability and continuity of the power supply system are relatively high re, the selection of 40KVA UPS server, put forward the key points of UPS capacity calculation and battery capacity calculation. The sudden operation of large machines and e, the shaking of the power network caused by the power network conversion, and so on, lead to the loss of data information, stuck and e destruction of the entire system.

山特UPS電源C6KS參數報價